OM series electric actuators offer a range of 35 Nm~4500 Nm torque. The actuator comes standard with NEMA 4X (IP67) environmental rating. All models are ISO 5211 compliant and have a visual position indicator. The manual override can be operated without clutch and brake under our research and development.

Enclosure

● IP67, NEMA 4X : Water-proof and dust-proof enclosure.
● Material : Dry powder coating aluminum alloy.

Motor

● F (Standard) or H (Optional) insulation class for all models.
● Built-in thermal protection prevents motor burning out.
   AC motor : 125±5/257±9^oF  DC motor : 90±5/ 194±9 ^oF

Duty Cycle 

● All models : 30% duty cycle (Standard)
● Extended duty cycle : (Optional)
  OM-A, OM-A-M, OM-1~OM-8 : 75% duty cycle
  OM-9~OM-13 : 50% duty cycle uty cycle

Position Indicator

All models have continuous mechanism position indicator on the top of actuator cover.

PRODUCTION STANDARDS

DESIGN:                      TS EN 1171
END CONNECTION:      FLANGED TS EN 1092-2 / ISO 7005-2
FACE TO FACE:           TS EN 558 Seri 15 / DIN 3202 F5
TEST:                          TS EN 12266-1 
MARKING:                   TS EN 19
 

General applications

- Offshore

- Water and wastewater technology

- Shipbuilding

- Power plants

Features

- Absolutely tight sealing with flow in either direction

- The valve body and disc are accurately machined which results in

  low operating torque and long service life and reliability.

- Triple shaft bearings prevents shaft deflection and guarantees

  optimum guidance even after many years of operating service.

- Can be disassembled, material-specific recycling possible.

- Single flange mounting is possible.

- Can be installed in any desired position.

- Maintenance-free

- Fully repairable valve

PRODUCTION STANDARDS

DESIGN:                 TS EN 593
END CONNECTION:  WAFER TYPE TS EN 1092-1 / ISO 7005-1
FACE TO FACE:        TS EN 558 Seri 20

                              ISO 5752 Seri 20

TEST:                      TS EN 12266-1
MARKING:               TS EN 19