HUY PHONG TECHNOLOGY COMPANY LIMITED
Head Office: 11 Vo Van Tan Street, Ward 6, District 3, Ho Chi Minh City, Vietnam
Rep. Office: 53 Road 9, Tan Kieng Ward, District 7, Ho Chi Minh City, Vietnam
Tel: (84-8) 5433 2773 – 5433 2774 Fax: (84-8) 5433 2775

logo1
CÔNG TY TNHH KỸ THUẬT HUY PHONG

Dorot control valve

This valve is operated by the pressure of the pipeline and is used for various control applications in water supply, fire fighting, industrial, sewage and irrigation systems. The valve can be closed or modulated using the line pressure or an external separate pressure source that is equal or higher than the line pressure.

Dorot valves are made for easy, inline maintenance, executed also by unskilled personal using basic tools. There are no shafts, bearings or seals that may corrode and there is no wear and tear by dirty abrasive water or chemicals.

 

Giá cũ :
đ
Giá mới :

Features and benefits

• Structural simplicity

• Superb design featuring exceptionally low pressure losses at high flow rates

• Can be used for regulating from no-flow to maximal flow with no need for additional throttling devices or

   by-pass valves

• For natural liquids, sea water and industrial effluents

• A wide selection of materials, coating and diaphragm types

• All valve models fit a wide variety of control applications using Dorot pilot valves

>>> Catalog

Related Products

van-chong-nuoc-va

Dorot control valve

This valve is operated by the pressure of the pipeline and is used for various control applications in water supply, fire fighting, industrial, sewage and irrigation systems. The valve can be closed or modulated using the line pressure or an external separate pressure source that is equal or higher than the line pressure.

Dorot valves are made for easy, inline maintenance, executed also by unskilled personal using basic tools. There are no shafts, bearings or seals that may corrode and there is no wear and tear by dirty abrasive water or chemicals.

 

đ
t-series-sunyeh

Electric Actuator T Series Sunyeh

Sun Yeh Compact Actuators T Series provide with torque of 6 Nm and 15 Nm. This compact actuator designs for a small space and applies to small valve and damper applications.

Features

- Compact size can install in small space.

- Comply to: NEMA 4X dry-powder coated aluminum alloy cover (Optional).

- Manual operation can be applied in case of electric failure.

- Built-in thermal protection prevents motor burning out.

- Simple design, easy operation.

đ
pro_121van-buom-f012-k18

Double flanged butterfly valve F 012-K1

General applications

- Offshore

- Water and wastewater technology

- Shipbuilding

- Power plants

Features

- Absolutely tight sealing with flow in either direction

- The valve body and disc are accurately machined which results in

  low operating torque and long service life and reliability.

- Triple shaft bearings prevents shaft deflection and guarantees

  optimum guidance even after many years of operating service.

- Can be disassembled, material-specific recycling possible.

- Single flange mounting is possible.

- Can be installed in any desired position.

- Maintenance-free

- Fully repairable valve

 

đ
van-buom-tay-gat-faf-3550

Butterfly valve 3550 FAF

PRODUCTION STANDARDS

 

DESIGN:                 TS EN 593
END CONNECTION:  WAFER TYPE TS EN 1092-1 / ISO 7005-1
FACE TO FACE:        TS EN 558 Seri 20

                              ISO 5752 Seri 20

TEST:                      TS EN 12266-1
MARKING:               TS EN 19





đ
s-series-sunyeh

Electric Actuator S Series Sunyeh

Standard Capability
 
● Duty cycle rating:50% (Conform to IEC standard)
● Two-position control
 
Ambient Temperature Range
 
Temperature-30~ +65/ -22~ +149
Humidity30% ~ 95%
 
Enclosure
 
IP67NEMA 4XWater-proof and dust-proof enclosure.
MaterialDry powder coating aluminum alloy.
 
Lubrication
 
Gear trains have been already lubricated sufficiently with anti-high
temperature lubricant at the factory
 
Position Indicator
 
All models have continuous mechanism position indicator on the
top of actuator cover.
đ
logo1 HUY PHONG TECHNOLOGY COMPANY LIMITED
Head Office: 11 Vo Van Tan Street, Ward 6, District 3, Ho Chi Minh City, Vietnam
Rep. Office: 53 Road 9, Tan Kieng Ward, District 7, Ho Chi Minh City, Vietnam
Tel: (84-8) 5433 2773 – 5433 2774 Fax: (84-8) 5433 2775